This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

• Key Features of the Raptor Front 3.0 Coil Over Shock:


• Com 12 PTFE Lined Bearings Ensure Maximum Strength and Durability


• Oversized 1” Heavy Duty CNC Machined Shock Shafts


• Extended Droop Travel and Increased Overall Performance on and off road


• Key Features of the Raptor Rear 3.0 Bypass Shock:


• 3.0 OEM Replacement Piggyback Reservoir Zeta 3 Tube Bypass Rear Shocks


• Easy-to-Adjust Detented Adjustment Knobs Offer Quick Adjustability without the Use of Tools


• High Resolution Bypass Valves Designed for Noticeable Fine Tune Adjustments in Rebound and Compression


• High Flow CNC Machined Welded Bypass Blocks designed to Increase Fluid Flow for Enhanced Performance & High Definition Tuning


• Replaceable Bypass Tubes That Can Easy Slide in to Position if you were to Dent or Damage One


• Direct Bolt in to OEM Location with Bypass Adjustment Knobs Easily Accessible for Tuning Adjustment


• 3.0 OEM Replacement Remote Reservoir Compression Adjustable Front Coil Over Shocks


• Special Engineered Dampened Valve Stops for Quiet and Precise Operation without the Standard Bypass Loud “Clicking” Noise you will find with Other Brands


• Multi Stage Cad Plated Finish with Polished and Anodized Top Cap / Rod Ends


• UHMH Machined Shaft & Rod End Protective Shin Guards Standard with Every Kit


• Key Features of the Raptor Upper Control Arms:


• 6061 Billet Aluminum


• Precision CNC Machined


• Patented Delta Joint (U.S. Patent No. 10,731,700)


• Easily Adjustable on the Vehicle for Perfect Wheel Alignments


• High Precision CNC Machined Pin Provides OEM Like Fitment


• RSMX PTFE Lined 7/8” Rod Ends


• Internal Hydraulic Bump Zone Designed for Maximum G-out Control in the Last 40% of Travel


• O-ring sealed billet dust cover


• Key Features of Hydraulic Bump Stop System:


• Designed for increased leaf spring clearance so there is no loss in up travel with stock or aftermarket springs


• Easy bolt on installation without having to remove the truck bed


• 6061 Solid billet cross bar that is polished & anodized


• Bump stop striker pad does not require leaf spring disassembly


• Comfortable on road manners with sufficient damping capability under extreme load


• Hydro-pneumatic bump stop increases bump energy capacity


• Velocity sensitive hydraulic bump stop increases the amount of energy absorbed the faster it is hit


• Reduces rear end kick and improves overall performance


• Easy-to-Adjust High Resolution Compression Adjuster Offers Fine Tuning Adjustments For All Types of Terrains


• Clamshell brackets strengthen frame in critical areas preventing frame damage from extreme off-road use


• Cross member and tension rods stabilize frame rails and prevent twisting under hard impacts


• Increases frame rigidity and improves overall vehicle dynamics


• Industry first billet cross beam


• Pre-tuned and Nitrogen charged for most Ford Raptors


• Integrated adjustability for future ICON Raptor specific products_carpartsone


• Direct Bolt in to OEM Location and Optimum Reservoir Positioning for Superb Heat Dissipation and protection


• Nitrogen Charged 6063-T832 Aluminum 10” Remote Reservoirs that are Precision CNC Honed & Hard Anodized


• Adjustable Ride Height from 1 – 3” of Lift


• ICON Engineered Eibach 3 5/8” ID High Quality Chrome Silicon Steel Springs that offer increased travel and performance

Attributes:

• 
  Brand Name: ICON Vehicle Dynamics


• 
  GTIN: 00840103419800


• 
  AAP_UDA_12: EA


• 
  AAP_UDA_22: 1


• 
  AAP_UDA_4: 55


• 
  Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH


• 
  California Prop 65 Warning: Yes


• 
  OEM Wheels & Tires Fitment: Yes


• 
  Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)


• 
  Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset


• 
  30: Yes


• 
  2064: Steel


• 
  2371: NO


• 
  3096: Black


• 
  3097: Yes


• 
  3390: Performance


• 
  5520: 3


• 
  7325: 2

Extended Information:

• 
  Country of Origin: US


• 
  Emissions : Emissions Compliance Exempt


• 
  Life Cycle Status: Available To Order

Packing Information:

• 
  Quantity of Each: 1.0


• 
  Package UOM: EA


• 
  Dimension: 38.0000 x 10.0000 x 8.0000 inches


• 
  Weight: 258.0000 lb

PDF:

USD : 92.69