12 or 24 VDC / Commercial Connector with Mating Harness / Lesser Rate Return Spring

The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail-safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24-volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides a more stable and rapid response to transient conditions. Applications include fuel injection pumps, with or without mechanical governors, rotary type pumps, and medium-sized gaseous fueled engines. The 25 degrees of rotation expands the application to a wider variety of engines.

Features:

• Easy Installation


• Universal Design


• Internal Return Spring


• Rapid Response to Transient


• Multiple Mounting Positions


• 2.2 lb.ft. Torque


• 25° Rotation

SPECIFICATIONS

PERFORMANCE

Available Torque (w/o Return Spring)
2.2 ft-lb max (2.7 Nm)

Maximum Operating Shaft Travel
25° ±1° CW/CCW

POWER INPUT

Operating Voltage
12 or 24 VDC

Normal Operating Current
3.0 Amps @ 12 VDC
1.5 Amps @ 24 VDC

Maximum Current
Continuously Rated
8.0 Amps @ 12 VDC
4.0 Amps @ 24 VDC

ENVIRONMENT

Operating Temperature Range
-65°F to +200°F (-54°C to +95°C)

Relative Humidity
up to 100%

All Surface Finishes
Fungus Proof and Corrosion Resistant

PHYSICAL

Weight
8.25 lb (3.75 kg)

Mounting
Any Position, electrical connector at the top preferred

RELIABILITY

Vibration
Up to 20 G, 50 – 500 Hz

Testing
100% Tested

USD : 69.75