Rear fender straps are essential equipment for extreme enduro events. Kriega's unique design is a self supporting/semi-rigid solution, which is always easy to find and use.
The fitting methods for the rear Haul Loop are more varied than for the front Haul Loop. The basic requirement is to get the strap around the rear sub-frame as easily as possible. Some applications may require the rear or side panels to be cut to allow the web to exit in the correct manner (holes in the fender plastic are best formed by a soldering iron)
NB - KTM EXC fitment is actually to the black plastic grab areas under the fender (slightly back from the end of the actual subframe).
~ Semi-rigid design
~ Universal fit (rear only)
~ Ultra-tough construction
~ HYPALON: abrasion resistant re-enforcement
~ TOUGHTEK - grips wet or dry
~ Alloy buckles
~ WEIGHT 50g
The fitting methods for the rear Haul Loop are more varied than for the front Haul Loop. The basic requirement is to get the strap around the rear sub-frame as easily as possible. Some applications may require the rear or side panels to be cut to allow the web to exit in the correct manner (holes in the fender plastic are best formed by a soldering iron)
NB - KTM EXC fitment is actually to the black plastic grab areas under the fender (slightly back from the end of the actual subframe).
~ Semi-rigid design
~ Universal fit (rear only)
~ Ultra-tough construction
~ HYPALON: abrasion resistant re-enforcement
~ TOUGHTEK - grips wet or dry
~ Alloy buckles
~ WEIGHT 50g
USD : 19.25
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
