• 1. System type can set as S1 Mains S2 Mains, S1 Mains S2 Gen, S1 Gen S2 Mains, S1 Gen S2 Gen;


• 2. 132x64 LCD with backlight, multilingual interface (including English, simplified Chinese or other languages), push-button operation;


• 3. Collect and display 2-way 3-phase voltage, frequency and phase;


• 4. LCD displays position state of the main switch (work position, test position and isolation position) as well as state of bypass switch; 


• 5. Display S1/S2 main switch and bypass switch total close times; 


• 6. Display present continues power supply time and S1/S2 total power supply time;


• 7. For stored-energy type ATS, its close relay will active after the PF input is active; 


• 8. Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection; 


• 9. Automatic/Manual mode. In manual mode, can force the switch to close or open;


• 10. All parameters can be set on site. Passwords authentication ensures authorized staff operation only;


• 11. The Genset can be a manual test on-site to achieve start/stop operation; 


• 12. The main switch has the function of automatic re-closing and close again when power off; 


• 13. Applicable for single-bypass, dual-bypass and mutual backup dual-bypass ATS;


• 14. Applicable for manual control ATS and remote control ATS;


• 15. Applicable for 2 isolated neutral lines;


• 16. Real-time clock (RTC); Event log function (event log can record 99 items circularly);


• 17. Scheduled Run & Scheduled Not Run (can be set as start Genset once a day/week/month whether with load or not).


• 18. Can control two generators to work as Cycle Run mode, Master Run mode, and Balance Run mode. 


• 19. Widely power supply range allows the controller can bear 80V instantaneous current;


• 20. Large terminal space allows the controller can bear maximum 625V input voltage;


• 21. With RS485 isolated communication interface. With "remote controlling, remote measuring, remote communication, remote regulating" function by the Modbus communication protocol. Can remote start/stop the Genset and remote control the ATS to close or open?


• 22. The USB interface enables debug parameters locally and upgrade program;  


• 23. Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires, single-phase 2-wire, and 2-phase 3-wire).


• 24. Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting，compact structure with easy installation.

USD : 88.0