Description :
Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

Note:

In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!

If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

Reminder:

Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.

USD : 60.0