360801

GAC Speed Governor Speed Controller ESD5220

From
$48.00
Learn More
Check Store Availability

We don't have enough stock on hand.

Adding to cart… The item has been added
Added to Cart

ESD5220 generator speed controller electrical panels governor



  • The 5220 Series speed control unit is an all-electronic device designed to control engine speed with fast and precise response transient load changes.

  • Isochronous Operation/Steady Stability-----+/-0.25% or better

  • Supply-----12 or 24 VDC Battery Systems(transient camp; reverse voltage protected)

  • Power Consumption-----50 ma continuous plus actuator current

  • Maximum Actuator Current at 25ºC(77ºF)-----10 Amps continuous


Input



  • Supply 12 or 24 VDC Battery System (Transient and Reverse Voltage)

  • Polarity Negative Ground (Case Isolated)

  • Power Consumption 50 ma continuous plus actuator current

  • Actuator Current Range @77°F (25 °C) - (Inductive Load) Min.2.5 Amps; Max. 10Amps continuous

  • Speed Sensor Signal 0.5-120 Volts RMS

  • Speed switch Relay contacts(N.O.and N.C) 10 Amps


Performance



  • Isochronous Operation/Steady State Stability ±0.25% or better

  • Speed Range/Governor 1K to 7.5K Hz continuous

  • Speed Drift with Temperature ±1% Max

  • Idle Adjust CW 60% of the set speed

  • Idle Adjust CCW Less than 1200 Hz.

  • Droop Range 1-5% regulation

  • Droop Adj. Max. (K-L Jumpered) 400 Hz., ±75Hz. Per 1.0A change

  • Droop Adj. Min. (K-L Jumpered) 15Hz., ±6Hz. Per 1.0A change

  • Speed Trim Range ±200 Hz

  • Remote Variable Speed Range 500 - 7.5 Hz. Or any part there of Terminal Sensitivity

  • Terminal Sensitivity J 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance

  • Terminal Sensitivity L 735 Hz., ±60 Hz / Volt @ 65 K Impedance

  • Terminal Sensitivity N 148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance

  • Terminal Sensitivity P 10 VDC Supply @ 20 ma Max

  • Speed witch adjustment range 1000-10000HZ


Environmental



  • Ambient Operating Temperature Range -40 to +180°F(-40°+85 °C)

  • Relative Humidity Up to 95%

  • All Surface Finishes Fungus Proof and Corrosion Resistant


Reliability



  • Vibration 1G @ 20 to 100 Hz.

  • Testing 100% Functionally Tested


Physical



  • Dimensions See outline (FIGURE 1)

  • Weigh1 1.8 lbs.(820 grams)

  • Mounting Any position, Vertical Preferred


USD : 48.0

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.

Reviews