The Flexible Adhesive Base is suitable for mounting to flat or curved surfaces. Using a super secure 3M Adhesive, the Flexible Adhesive Base has 4 tabs which can be bent to match the curved surface.

A 10mm Spacers and x2 Screws (1 x M5x30 and 1 x M5x45) are supplied for connecting the spacer to a Quad Lock 360 HEAD or ARM.
1 x Flexible Adhesive Base
1 x 10mm Spacers
1 x M5x30 screw (for connecting Spacer to Lever Head or 360 Arms)
1 x M5x45 screw (for connecting Spacer to Weatherproof Wireless Charging Head)
1 x Isopropyl Alcohol Wipe
~ Made from tough, nylon construction, the Flexible Adhesive Base is 60mm x 60mm with a height of 18.3mm.
~ Each tab is 28mm wide and has 2 grooves, which are the bending points to allow grip to curved surfaces. These can be used in a concave or convex manner.
~ The adhesive used is the renowned, 3M Adhesive for extra strong grip.
~ Compatible with all Quad Lock 360 ARMs and HEADs.

The Flexible Adhesive Base can be attached to a number of different flat and curved surfaces, however, it is not intended for severely curved surfaces (eg. 180 degrees).

The 3M VHB Adhesive will adhere to smooth, non-textured, non-porous surfaces such as:
~ Un-coated Glass
~ Plastics such as PC, ABS, PVC, Nylon, Acrylic (eg. plastic car dash, console)
~ Metals
~ Fibreglass
~ Sealed wood

It is not recommended for the following substrates:
~ Rubber, TPU, TPE
~ Leather
~ Silicone
~ Soft touch coating or paint
~ Low surface energy plastics such as Polypropylene (PP), Polyethylene (PE), Acetal, HDPE
~ Unsealed wood
Note:
~ We recommend thoroughly cleaning the surface before applying the Flexible Adhesive Base with an alcohol-based cleaning substance.
~ Anything that causes high vibrations or receives constant exposure from outdoor elements. Please ensure the substrate is thoroughly cleaned and dry before applying the Flexible Adhesive Base.

USD : 8.4