SmartGen BACM2420 Battery Charger
The BACM2420 battery charger is intelligent and multi-function which is specially designed to meet the charging characteristics of the lead-acid engine starter batteries. Suitable for 24V or 12V battery and the maximum charge current is 20A.
- Power Supply:AC(100~277)V
- Case Dimensions:265*156*68(mm)
- Panel Cutout:239*142(mm)
- Operating Temp. :(-30~+55)℃
- Weight:2.2kg
CHARACTERISTICS:
Switch power supply structure, wide input AC voltage range, small size, lightweight, high-efficiency rate;
Users can select an automatic two-stage charging process or automatic three-stage charging process as needed. Both the two charging process is carried out according to storage battery charging characteristics to prevent overcharging and significantly prolong battery lifetime;
Built-in PFC circuit can calibrate the power factor above 0.99;
Battery voltage detection ports can detect the battery voltage in real-time.
Battery low voltage output port; it will output low level immediately after the battery voltage has fallen below the set value for preset delay.
Temperature sensor port allows for monitoring the battery temperature in real-time and temperature compensation function which can prevent the battery temperature is too high effectively.
Mains failure port; It will output a low level when the AC input is interrupted.
Standard RS485 communication port.
BACM2410 charger is suitable for 24V battery, or suitable for 12V battery after changing the configuration information;Rated current: 20A.
LED display: Full charged indication (Green light) and charging indication (Red light).
USD : 67.25
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.