Our coilover engine cage is built from 1.50" thick.188w 4130 chromoly tubing and welds onto the frame in three locations for maximum strength. It has a x-brace that bolts in to eliminate flexing over the engine. Our mounts locate off of pre existing bolts/holes in the frame for placement. We designed this for our 4.5" and 6.5" wider RWD I-beams and 4" wider 4WD TTB housings. This will not work with stock width suspension. Designed for a 2.5 x 14" Sway-Away coilovers or 2.5 x 12" FOX/King coilovers with 300/450 springs. Comes raw, un-powder coated. Some models require battery being relocated and the stock airbox system removed. The airbox/air filter needs to be towards the front of the engine, not off to the side. We also recommend better engine mounts from AutoFab. We highly recommend a qualified off-road shop installing this with the amount of cutting/grinding/welding/setup involved. These are made to order and take 5-6 weeks minimum to build once an order is placed with a 50% deposit. Cutting/Grinding/Welding is involved with the installation.

• 4130 Chromoly Tubing

Attributes:

• 
  Brand Name: Camburg


• 
  GTIN: 00888563191270


• 
  10: 4130 Chromoly


• 
  30: No


• 
  40: No


• 
  200: Powder Coated


• 
  2354: Performance


• 
  3145: Specific


• 
  3390: Performance

Extended Information:

• 
  Country of Origin: US


• 
  Emissions : Emissions Compliance Exempt


• 
  Life Cycle Status: Available To Order

Packing Information:

• 
  Quantity of Each: 1.0


• 
  Package UOM: EA


• 
  Weight: 0 lb

USD : 92.69