• Capable of 345 HP!


• Direct Drop-in Design


• Light Weight Billet Comp Wheel


• Spools Faster than Black R365 Turbo

• 
  

  You asked and RV6 delivered. The RV6 R365 Red Turbo is a ball bearing version derived from the RV6’s highly developed Black Series turbo. Externally, the Red Series is identical to the Black, giving the same precise fitment for L15 equipped CivicX. The changes are internal with the Red Turbo getting a dual ball bearing cartridge providing 400RPM faster spool. The Red Series uses much of the same innovation that made the R365 Black such a success. 

  
  

  This is the latest update to the R365 Series Turbo. It features a new compressor and turbine wheel for faster spool and more top end power. An inconel turbo wheel is used to cut down weight and reduce fatigue from heat cycles. This is paired with a lightweight billet compressor wheel to maximize spool characteristics.  

  
  

  This turbo will require thicker 0W-30 or 5W-30 oil. The reason is that running increased boost pressures on a small frame turbocharger puts significant load on the thrust bearing. The thicker oil will offer better production to the turbo and engine at higher boost levels.

  
  

  
  Note: Professional installation recommended. Custom tuning required.
  

  
  

  
  Features
  

  
  
  
  
  • Direct drop in design
  
  
  • Optimized housings made from scratch 
  
  
  • Fast spooling ball bearing cartridge 
  
  
  • Light weight billet compressor wheel
  
  
  • Inconel Alloy Turbine wheel
  
  
  • Optimized FEA analysis design
  
  
  
  



• 
  2016‐2021 Honda Civic 1.5T
  2017‐2021 Honda Civic Si  
  
  


• 
  Compressor
  Inducer - 50.38mm
  
  
  Exducer - 68mm
  
  
  Blades - 5+5
  
  
  Turbine
  
  
  Inducer 47mm
  
  
  Exducer 41.4mm
  
  
  Blades - 9
  
  
  A/R 0.5  
  
  



• 
  1 x R365 Red Turbocharger  
  1 x Inlet Gasket
  
  
  1 x Outlet Gasket
  
  
  1 x Oil Feed Adapter  
  
  
  1 x Preassembled Oil Feed Line with Banjo Adapter
  
  
  1 x Upper Coolant Banjo Adapter
  
  
  1 x Lower Coolant Banjo Adapter
  
  
  2 x M12 Coolant Banjo Bolt
  
  
  1 x M10 Oil Banjo Bolt (1.0MM)
  
  
  4 x M12 Copper Washer
  
  
  2 x M10 Copper Washer
  
  
  
  2 x M10 x 1.25 x 30mm Flange bolts  
  
  
  2 x M10 x 1.25 x 42mm Studs
  
  
  2 x M10 x 1.25 Flange Nuts
  
  
  1 x M8 x 1.25 x 48mm Studs
  
  
  1 x Oil Strainer O-Ring  
  
  


• 
  
  

USD : 92.69