Motul Motocool Expert is a ready to use cooling liquid, anti-freeze and anti-corrosion for bikes cooling systems. Motul Motocool Expert has been based on monoethyleneglycol and contains reinforced hybrid anti-corrosion additives suitable for light aluminum alloys used in bike engine design.
This is a ready to use cooling liquid (do not dilute), antifreeze and anti-corrosion protectant for all motorcycle cooling systems. Its operating temperatures work to minus 37 degrees C, protecting the cooling system from freezing, 'Motocool Expert' incorporates a high-tech organic formulation which divides the corrosion rate by three compared to other 'common' organic coolants. Provides an excellent thermal exchange and optimum engine cooling efficiency that helps to prevent the cooling system boiling over (high boiling point of 135 degrees C).
~ Protects the cooling system from freezing (-37°C / -35°F) and metallic parts from corrosion
~ Excellent thermal exchange to improve engine cooling efficiency
~ Avoid engine overheating with its high boiling point: 135°C / 275°F (at +1.5 bar)
~ Outstanding anti-corrosion and anti-cavitation properties that remain while aging
Seals, rubber pipes and plastic parts
~ Recommended Application, All motorcycle cooling systems, road, off road, quads - suitable for light aluminum alloys
This is a ready to use cooling liquid (do not dilute), antifreeze and anti-corrosion protectant for all motorcycle cooling systems. Its operating temperatures work to minus 37 degrees C, protecting the cooling system from freezing, 'Motocool Expert' incorporates a high-tech organic formulation which divides the corrosion rate by three compared to other 'common' organic coolants. Provides an excellent thermal exchange and optimum engine cooling efficiency that helps to prevent the cooling system boiling over (high boiling point of 135 degrees C).
~ Protects the cooling system from freezing (-37°C / -35°F) and metallic parts from corrosion
~ Excellent thermal exchange to improve engine cooling efficiency
~ Avoid engine overheating with its high boiling point: 135°C / 275°F (at +1.5 bar)
~ Outstanding anti-corrosion and anti-cavitation properties that remain while aging
Seals, rubber pipes and plastic parts
~ Recommended Application, All motorcycle cooling systems, road, off road, quads - suitable for light aluminum alloys
USD : 8.4
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
